CCNA LABS Static Routing

 Static Routing

R1

Router>enable

 terminal

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#interface GigabitEthernet0/0

Router(config-if)#ip address 192.168.10.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#interface GigabitEthernet0/1

Router(config-if)#ip address 192.168.30.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up

Router(config)#IP ROUTE 192.168.20.0 255.255.255.0 192.168.10.2

Router(config)#IP ROUTE 192.168.40.0 255.255.255.0 192.168.10.2

R2

Router>enable

Router#configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#interface GigabitEthernet0/1

Router(config-if)#exit

Router(config-if)#ip address 192.168.10.2 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#interface GigabitEthernet0/1

Router(config-if)#ip address 192.168.20.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up

Router(config)#IP ROUTE 192.168.30.0 255.255.255.0 192.168.10.1

Router(config)#IP ROUTE 192.168.40.0 255.255.255.0 192.168.20.2

R3

Router>enable

Router#configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#interface GigabitEthernet0/0

Router(config-if)#ip address 192.168.20.2 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#interface GigabitEthernet0/1

Router(config-if)#ip address 192.168.40.1 255.255.255.0

Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up

Router(config)#IP ROUTE 192.168.10.0 255.255.255.0 192.168.20.1

Router(config)#IP ROUTE 192.168.30.0 255.255.255.0 192.168.20.1

Follow me on Instagram 

Join me on LinkedIn

Follow me on FB

Subscribe the channel 

Subscribe the channel